DC Gaussmeter Model 1-ST *Refurbished Unit with One Year Warranty*

Manufactured in the USA by AlphaLab, Inc.

The Gaussmeter Model 1-ST measures the field of even the strongest magnet (to 20kG) down to fine resolution (0.1G). Features rapid turn-on and fast update.

SKU: MD1STREFURB $280

Avaliable Options:
Detachable Rubber Boot: $12 Hard Carrying Case: $18 NIST traceable Certificate: $30

Product Description:
The Model 1-ST measures strength and polarity of magnetic fields up to 19,999.9 gauss. The sensor can easily fit in a .060 inch (1.5 mm) gap and is at the end of a 100 cm flexible cable. The sensor end can be bent if required for a variety of situations. Place the sensor on a magnet face to measure the field. With a resolution of 0.1 gauss, it can measure any tiny variation from magnet to magnet or it can detect if a given magnet has lost even a little strength. Bend the sensor in to a “L” to measure inside a DC solenoid tube. The 5 ½ digit display requires neither auto nor manual range change, making it easier to use than older style 3 ½ or 4 ½ digit meters. Turn on the meter and immediately begin reading fields (updates 4 times per second). There is no setup required, making this the fastest, easiest gaussmeter available. (Full Length Description)

Features

• High dynamic range 5 ½ digit display reads even the strongest magnets with .1 gauss resolution, including polarity.
• Turns on instantly, updates four times a second, no setup or initial calibration required.
• An offset control allows +/- 15 gauss adjustment if required (set knob to center if no offset is needed).
• 1% accuracy at room temperature, including probe.
• Probe and battery included.
• Optional rubber boot and hard carrying case are available.
• CE Compliant.

Applications

• Measures all permanent magnets. (Maximum field of magnets is about 15,000, which occurs only with rare-earth magnets in a gap configuration.)
• High resolution of 0.1 gauss over the entire range of +19,999.9 to -19,999.9 gauss allows detection of any variation in field from a magnet.
• Measures inside DC Solenoids (probe is bent into “L” shape to measure this).
• Sufficient resolution to map fields far from magnets.

Recalibration service for MD1-ST: $60

SKU: MD1STREFURB $280