DC Gaussmeter Model 1-HS
Manufactured in the USA by AlphaLab, Inc.
The Gaussmeter Model 1-HS reads moderate-strength static magnetic fields up to 800 G with a resolution of .01G. It measures magnetization of ferrous metals, solenoids and the far field of strong magnets.
SKU: MD1HS $315
Available Options (also available for individual purchase below):
Detachable Rubber Boot: $12 Hard Carrying Case: $18 NIST traceable Certificate: $30
Product Description:
The Model 1-HS measures the strength and polarity of magnetic fields up to 799.99 gauss. The thin sensor is at the end of a 100 cm flexible cable. The sensor tip is also flexible and can be bent for a variety of situations. The sensor can be held against the surface of a steel part to check for residual magnetism, or it can be bent into an “L” shape to measure inside a DC Solenoid. This meter has a resolution of .01 gauss (1/50 of the Earth’s typical field) which is finer resolution than the Model 1-ST. It is also used to map fields from large magnets (If fields are over 800 gauss, use the Model 1-ST). The meter has immediate turn-on and updates 4 times a second. There is no setup required, making this the fastest gaussmeter available. This is a 1-axis meter. (Full Length Description) For a 3-axis meter, see the Vector Gaussmeter Model VGM.
Features:
- High dynamic range and sensitivity: reads up to 799.99 gauss with .01 gauss resolution including polarity.
- Instant on, updates four times a second, with no setup or initial calibration required.
- An offset control allows +/- 4 gauss adjustment if required (set knob to center if offset is not needed).
- 1% accuracy at room temperature.
- Flexible probe and battery are included.
- Optional rubber boot and hard carry case are available.
- CE Compliant.
Applications:
- Makes detailed measurement of residual magnetism in metal parts.
- Use to map field near a magnet, such as the 5 gauss line around an MRI machine.
- Detect ambient field direction and strength, such as Earth Field.
|
SPECIFICATIONS: 1-axis DC Gaussmeter MD1-HS |
|
|---|---|
| Range/Resolution: | 799.99 G/0.01 G; with polarity indicator |
| Accuracy: | +/- 1% of reading (16° to 29°C); +/- 2% (-4° to 65°C) |
| Offset: | Potentiometer controlled +/- 4 G |
| Probe (non-detachable): | 2.1 (thick) x 4.3 x 24 mm |
| Size: | 5.2 x 3.6 x 1.6 inches; 132 x 91 x 41 mm |
| Weight: | 8 oz |
| Battery: | 9 volt alkaline (~ 20 hour life)/ "Low Battery" indicator |
Recalibration service for MD1-HS: $60
SKU: MD1HS $315
